Trying to figure out how SuperSlicer does profiles. Here's my conundrum. I have and Ender 3 Max and an Ender 3v2. Both are basically the same now except for the build volume. Both have identical 4.2.7 boards, Micro Swiss all metal hot ends and Direct Drive, EZABL, v2 petsfang cooling and both running current TH3D unified firmware. I can use the same print profile in Cura for both physical printers. I'd like to do the same with SuperSlicer. I have the two "physical printers" created, one with E3v2 build volume and one with E3Max build volume. Anyone familiar with a way to run the same User Preset (Prussa for profile I guess?). I have a pretty well dialed in 0.20mm Normal @ Creality preset that I built on the E3Max, but it doesn't show up as an option when I select the E3v2. Anyone familiar with Prussa slicer that might have a fix?
I did find each profile in the configuration folder. Each is an .ini file. I copied/pasted/renamed the Max .ini file for the printer setting and renamed it E3v2.ini. Restarted Super Slicer and it did show up as a distinctly different printing profile. Now I need to figure out how to do the physical profile piece.